Frequency Response:
- 16 - 280 Hz (overall)
- 28 - 180 Hz (± 3dB)
Amplifier:
- Class AB
- 850 Watts Dynamic
- 350 Watts RMS
Completely new industrial design, new driver technology and a new amplifier design
Available in 8”, 10”, 12” and 15” these new DB subwoofer lineup is the predecessor of the successful SPL I series, a very small form factor closed box design.
The completely new rigidly braced MDF closed box design with a front firing woofer for impacting performance without any noise from the cabinet. Due to this small form factor it is easy to integrate into you listening set up. A high excursion driver with massive dual ferrite magnet and optimized internal motor technology, using a 4 layer voice coil for maximum output with extremely low distortion, following the Velodyne Acoustics design principles. Superior bass quality, for a deeper, more accurate bass performance. Line-level and speaker-level inputs let you connect this sub to just about any home audio system.
You can use the variable crossover and phase control to fine-tune the sub's output, so the bass will blend in perfectly with the mids and highs coming from your main speakers, tailor the sub's low-frequency response to the acoustics of your room.
Features
Closed Box Design
Completely new rigidly braced MDF closed box design with a front firing woofer
4 Layer Voice Coil
4 layer voice coil for maximum output with extremely low distortion
High Excursion Driver
High excursion driver with massive dual ferrite magnet
High Flexibility
Line-level and speaker-level inputs for maximum flexibility
Specifications
Driver: | 10" Forward Firing |
Amplifier: | Class AB 850 Watts Dynamic 350 Watts RMS |
Frequency Response (Overall): | 16 - 280Hz |
Frequency Response (± 3 dB): | 28 - 180Hz |
Cabinet Design: |
Sealed Cabinet MDF with 2" Front Baffle |
High Pass Crossover: | Full Range |
Low Pass Crossover: |
50 - 180Hz Adjustable (12dB/Octave) |
Phase: | Adjustable 0-180 degrees |
Magnet Structure: | Dual Ferrite Motor |
Voice Coil: | Four Layer, 52mm |
Cone: | PP Reinforced Membrane |
Outputs: |
Gold plated LFE RCA |
Inputs: |
Gold plated stereo RCA Line-In / LFE in Nickel plated speaker level |
Grille: | Fabric over round MDF frame |
Power: | On / Off / Auto |
Shipping Dimensions: |
40 x 44 x 39 cm |
Dimensions (H x W x D): Including Feet & Connectors |
31.6 x 29.6 x 34.8 cm |
Shipping Weight: | 12.5kg |